INNO
INNO V7 Fiber Optic Cleaver – Single & Ribbon, FTTH/FTTx
INNO V7 Fiber Optic Cleaver – Single & Ribbon, FTTH/FTTx
Couldn't load pickup availability
INNO V7 Fiber Optic Cleaver – Single & Ribbon Cleaving for FTTH/FTTx
The INNO V7 is a versatile, high-precision fiber cleaver capable of handling both single fiber and ribbon fiber up to 12 fibers in a simple 2-step operation. Designed to complement the full INNO VIEW series fusion splicer lineup, the V7 supports the widest range of fiber cable types on the market — from 250 µm bare fiber to 3.0 mm drop cable and flat cable — making it the go-to cleaver for FTTH installers, splice contractors, and data center technicians.
Its blade push-back reclaim function and optional automatic fiber shard collector keep the workspace clean and safe, while the universal single-fiber holder and replaceable ribbon holder ensure compatibility across job types without swapping tools.
Key Features
- ✅ Single & ribbon cleaving – supports 1 fiber up to 12-fiber ribbon in one tool
- ✅ <0.5° typical cleave angle – high-precision, low-loss cleaves for fusion splicing
- ✅ 2-step operation – fast, simple, and consistent for high-volume workflows
- ✅ Universal single-fiber holder – supports 250 µm, 900 µm, 3.0 mm, and flat cable
- ✅ Replaceable ribbon holder – accommodates 2–12 fiber ribbon cable
- ✅ ~48,000 cleave blade life – 1,000 cleaves × 16 positions × 3 heights
- ✅ Blade push-back reclaim function – safe blade retraction after each cleave
- ✅ Optional automatic fiber shard collector – keeps workspace clean and safe
- ✅ Compatible with all INNO VIEW series fusion splicers
Technical Specifications
| Parameter | Specification |
|---|---|
| Type | Single & ribbon fiber cleaver |
| Cladding Diameter | 125 µm |
| Typical Cleave Angle | <0.5° |
| Cleave Length – Single Fiber | 8–20 mm |
| Cleave Length – Ribbon Fiber | 10 mm |
| Applicable Single Fiber | 250 µm, 900 µm, 3.0 mm cable, flat cable (universal holder) |
| Applicable Ribbon Fiber | 2–12 fiber ribbon cable (replaceable holder) |
| Operation Steps | 2 steps |
| Blade Life | ~48,000 cleaves (1,000 × 16 positions × 3 heights) |
| Reclaim Function | Blade push-back |
| Holder – Single Fiber | Universal holder (included) |
| Holder – Ribbon Fiber | Replaceable holder |
| Fiber Shard Collector | Optional (automatic) |
| Splicer Compatibility | All INNO VIEW series fusion splicers |
Typical Use Cases
- FTTH / FTTx drop terminations and field splicing (single fiber)
- Ribbon fiber splice preparation for data centers and trunk cable work
- Central office and splice lab multi-fiber workflows
- Paired with INNO VIEW series fusion splicers for a complete end-to-end splicing solution
- Contractors handling mixed single/ribbon fiber jobs with one tool
Frequently Asked Questions
Q: Can the V7 cleave both single fiber and ribbon fiber?
A: Yes. The V7 supports single fiber (250 µm, 900 µm, 3.0 mm, flat cable) with the universal holder, and ribbon fiber from 2 to 12 fibers with the replaceable ribbon holder.
Q: What is the blade life of the V7?
A: The blade is rated for approximately 48,000 cleaves, calculated as 1,000 cleaves per step × 16 blade positions × 3 height settings. Actual life depends on fiber type and operating conditions.
Q: Is the V7 compatible with non-INNO fusion splicers?
A: The V7 is optimized for INNO VIEW series splicers. It can also be used with most third-party fusion splicers that accept standard cleave lengths (8–20 mm single / 10 mm ribbon).
Q: Is the fiber shard collector included?
A: The automatic fiber shard collector is optional and may not be included in the standard package. Please check the listing or contact us to confirm what is included with your order.
Q: What is the V7’s cleave angle specification?
A: The V7 achieves a typical cleave angle of less than 0.5°, meeting the requirements for low-loss fusion splicing on both singlemode and multimode fiber.
Q: What warranty does the V7 come with?
A: The INNO V7 comes with a 1-month warranty. Please contact us for after-sales support or extended warranty options.
