Fujikura ELCT2-16B Fusion Splicer Replacement Electrodes | FSM-27S/28S/36S/37S/41S/48S/87C/87S/88S/88R/90S/90R

Fujikura ELCT2-16B Fusion Splicer Replacement Electrodes – FSM-27S / 28S / 36S / 37S / 41S / 48S / 87C / 87S / 88S / 88R / 90S / 90R

The Fujikura ELCT2-16B is the genuine OEM replacement electrode set for Fujikura FSM-series fusion splicers. Each set contains 1 pair (2 pcs.) of precision tungsten alloy electrodes engineered to Fujikura’s exact specifications — ensuring stable arc discharge, consistent splice loss, and reliable performance across all compatible splicer models.

Worn electrodes are the leading cause of high splice loss, arc instability, and calibration failures in Fujikura splicers. Replacing with genuine ELCT2-16B electrodes at the recommended interval restores factory-spec arc performance and protects your splicer’s arc chamber from damage caused by degraded tips. With a rated life of up to 5,000 arc cycles, the ELCT2-16B delivers long-lasting, cost-effective performance for FTTH installers, telecom contractors, and fiber optic service teams.

Compatible Fujikura Fusion Splicer Models

• Fujikura FSM-27S
• Fujikura FSM-28S
• Fujikura FSM-36S
• Fujikura FSM-37S
• Fujikura FSM-41S
• Fujikura FSM-48S
• Fujikura FSM-87C
• Fujikura FSM-87S
• Fujikura FSM-88S
• Fujikura FSM-88R (Ribbon)
• Fujikura FSM-90S
• Fujikura FSM-90R (Ribbon)

Key Features

• Genuine OEM Fujikura Electrodes: Original manufacturer part — not aftermarket — for guaranteed compatibility and arc performance
• Up to 5,000 Arc Cycles: Industry-leading electrode life for reduced replacement frequency and lower total cost of ownership
• Tungsten Alloy Construction: High-purity tungsten alloy tips for stable, symmetric arc discharge and consistent splice quality
• Restores Arc Stability: Eliminates high splice loss, arc asymmetry, and calibration errors caused by worn electrode tips
• Broad Model Coverage: One part number covers 12 Fujikura FSM-series splicers including single-fiber and ribbon models
• Precise Dimensions: 2mm diameter, 16mm length — exact fit for all compatible FSM-series arc chambers
• Consumable Item: No warranty — standard for all fusion splicer electrodes across all brands

Technical Specifications

When to Replace Your Fujikura ELCT2-16B Electrodes

Fujikura recommends replacing ELCT2-16B electrodes every 3,000–5,000 arc discharges. Most FSM-series splicers display the current arc count in the maintenance menu. Replace your electrodes sooner if you observe any of the following:

• Increasing average splice loss despite correct fiber preparation and cleave quality
• Frequent arc calibration failures or arc check errors on FSM-41S, FSM-88S, FSM-90S, or other compatible models
• Visible electrode tip erosion, pitting, or asymmetric wear
• Splicer error messages related to arc power or electrode condition
• Inconsistent splice results on fiber types that previously spliced reliably

Package Contents

• Fujikura ELCT2-16B Replacement Electrodes × 1 pair (2 pcs.)

Frequently Asked Questions

Q: Are ELCT2-16B electrodes compatible with both single-fiber and ribbon Fujikura splicers?
A: Yes. The ELCT2-16B is compatible with both single-fiber models (FSM-27S, 28S, 36S, 37S, 41S, 48S, 87C, 87S, 88S, 90S) and ribbon models (FSM-88R, 90R).

Q: What is the difference between ELCT2-16B and other Fujikura electrode part numbers?
A: Different Fujikura electrode part numbers correspond to different splicer platforms. The ELCT2-16B (2mm diameter, 16mm length) is designed for the FSM-27S through FSM-90S/90R platform. Other Fujikura splicers such as the FSM-60S or FSM-70S use different electrode part numbers. Always verify your splicer model before ordering.

Q: How often should I replace the electrodes on my Fujikura FSM-90S or FSM-41S?
A: Fujikura recommends replacing ELCT2-16B electrodes every 3,000–5,000 arc discharges. Check the arc count in your splicer’s maintenance menu. Replace immediately if you notice increasing splice loss, arc instability, or calibration failures.

Q: Do I need to run arc calibration after installing new ELCT2-16B electrodes?
A: Yes. After installing new electrodes, always run the splicer’s arc calibration (arc check) routine before resuming splicing. This allows the FSM splicer to characterize the new electrodes and optimize arc power for your current altitude and environmental conditions.

Q: Why are fusion splicer electrodes sold without a warranty?
A: Fusion splicer electrodes are consumable items that wear out through normal use. No warranty coverage for consumables is the industry standard across all brands including Fujikura, Sumitomo, INNO, and AFL. For bulk pricing or technical questions, contact us at info@splicermarket.com.