COMWAY
Comway C109 High Precision Optical Fiber Cleaver
Comway C109 High Precision Optical Fiber Cleaver
Couldn't load pickup availability
Comway C109 High Precision Optical Fiber Cleaver
The Comway C109 is a high-precision single-fiber cleaver built for FTTH installers and fiber optic technicians who need consistent, low-angle cleaves in the field. Its automatic anvil drop mechanism reduces the number of manual steps per cleave, minimizes double-scoring risk, and delivers repeatable results across thousands of fibers — all in a compact, dust- and rain-resistant body.
Whether you're working in a central office, a street cabinet, or on a rooftop drop installation, the C109's ergonomic form factor and superior blade height/rotational adjustment make it a reliable daily-use tool for single-mode and multimode fiber preparation.
Key Features
- ✅ Typical cleave angle: 0.5° – consistent, low-angle cleaves for low-loss splices
- ✅ Automatic anvil drop – fewer steps, better cleave consistency, prevents double scoring
- ✅ Superior blade height & rotational adjustment – fine-tune for optimal performance
- ✅ Automatic fiber scrap collection – keeps your workspace clean and safe
- ✅ ~48,000 cleave blade life – long service life reduces replacement costs
- ✅ Dust & rain resistant – rated for field use in challenging environments
- ✅ Compact & lightweight – 75 × 63 × 63 mm, 491 g
Technical Specifications
| Parameter | Specification |
|---|---|
| Cleave Angle | Typical 0.5° |
| Fiber Count | 1 (single fiber) |
| Fiber Diameter | 125 µm |
| Coating Diameter | 250 µm / 900 µm / 3 mm (pigtail / drop cable) |
| Blade Life | ~48,000 cleaves |
| Dimensions (L×W×H) | 75 × 63 × 63 mm |
| Weight | 491 g |
| Operating Condition | 0–40°C, 0–95% RH (non-condensing) |
| Storage Condition | -40–80°C, 0–95% RH (non-condensing) |
| Dust Resistance | Exposure to 0.1–500 µm Alumina Silicate dust |
| Rain Resistance | 10 mm/hr for 10 minutes |
Typical Use Cases
- FTTH / FTTx drop terminations and field splicing
- Single-mode and multimode fiber preparation for fusion splicing
- Central office and street cabinet fiber work
- Pigtail and drop cable cleaving (250 µm, 900 µm, 3 mm coatings)
- Paired with Comway or third-party fusion splicers for end-to-end field workflow
Frequently Asked Questions
Q: What does "automatic anvil drop" mean?
A: The anvil automatically descends to hold the fiber in place before the blade scores it. This eliminates a manual pressing step, reduces operator error, and prevents the blade from double-scoring the fiber — resulting in cleaner, more consistent cleave angles.
Q: Can the C109 cleave ribbon fiber or multiple fibers at once?
A: No. The C109 is designed for single bare fiber cleaving (125 µm cladding). For ribbon or multi-fiber cleaving, a ribbon cleaver is required.
Q: What coating diameters does the C109 support?
A: It supports 250 µm (standard bare fiber), 900 µm (tight-buffered), and 3 mm (drop cable jacket) — covering the most common FTTH field scenarios.
Q: How long does the blade last?
A: The blade is rated for approximately 48,000 cleaves. Actual life depends on fiber type, cleanliness, and operating conditions. Replacement blades are available separately.
Q: Is the C109 suitable for outdoor field use?
A: Yes. It is rated for dust resistance (Alumina Silicate, 0.1–500 µm) and rain resistance (10 mm/hr for 10 min), making it suitable for outdoor cabinet and drop installation work.
Q: Is the C109 compatible with Comway fusion splicers?
A: Yes. The C109 is designed to complement Comway's fusion splicer lineup and produces cleave lengths compatible with standard splice holders. It can also be used with most third-party splicers.
