{"title":"Optical And Equipment Accessories","description":"","products":[{"product_id":"fiber-cleaver-tekcn-30-cleaver","title":"TEKCN TC-30 High Precision Fiber Optic Cleaver","description":"\u003ch2\u003eTEKCN TC-30 High Precision Fiber Optic Cleaver\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eTEKCN TC-30\u003c\/strong\u003e is a compact, high-precision fiber cleaver designed for daily-use single-fiber cleaving in FTTH installations, splice labs, and field deployments. With a \u003cstrong\u003etypical cleave angle of 0.5°\u003c\/strong\u003e and a 24-position rotatable blade rated for \u003cstrong\u003e~48,000 cleaves\u003c\/strong\u003e, the TC-30 delivers consistent, low-loss cleave quality for both singlemode and multimode fiber — all in a lightweight, pocket-friendly body.\u003c\/p\u003e\n\n\u003cp\u003eIts simple one-step operation and tool-less blade rotation make it an ideal choice for technicians who need a reliable, low-maintenance cleaver that keeps pace with high-volume splicing workflows.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/ht30_01_480x480.jpg?v=1594633672\" alt=\"TEKCN TC-30 High Precision Fiber Optic Cleaver\" style=\"max-width:100%; height:auto;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/ht30_02_480x480.jpg?v=1594633534\" alt=\"TEKCN TC-30 Fiber Cleaver side view\" style=\"max-width:100%; height:auto;\"\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e✅ \u003cstrong\u003e0.5° typical cleave angle\u003c\/strong\u003e – consistent low-angle cleaves for low-loss fusion splices\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003e~48,000 cleave blade life\u003c\/strong\u003e – 2,000 cleaves × 24 rotation positions\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003e24-position rotatable \u0026amp; replaceable blade\u003c\/strong\u003e – maximize blade life, minimize cost\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eSinglemode \u0026amp; multimode compatible\u003c\/strong\u003e – 125 µm cladding, 250–900 µm coating\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eCompact \u0026amp; lightweight\u003c\/strong\u003e – 62 × 60 × 60 mm, 491 g\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eSimple operation\u003c\/strong\u003e – easy to learn, reliable for high-volume daily use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse; width:100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eTEKCN TC-30\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplicable Fiber\u003c\/td\u003e\n\u003ctd\u003eSinglemode \u0026amp; Multimode\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFiber Diameter\u003c\/td\u003e\n\u003ctd\u003e125 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCoating Diameter\u003c\/td\u003e\n\u003ctd\u003e250 µm – 900 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTypical Cleave Angle\u003c\/td\u003e\n\u003ctd\u003e0.5°\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCleave Length (250 µm coating)\u003c\/td\u003e\n\u003ctd\u003e9–16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCleave Length (900 µm coating)\u003c\/td\u003e\n\u003ctd\u003e10–16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBlade Life\u003c\/td\u003e\n\u003ctd\u003e~48,000 cleaves (2,000 per position × 24 positions)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBlade Positions\u003c\/td\u003e\n\u003ctd\u003e24 (rotatable \u0026amp; replaceable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (W×D×H)\u003c\/td\u003e\n\u003ctd\u003e62 × 60 × 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e491 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/TEKCN-30_cleaver_structure_480x480.png?v=1600855810\" alt=\"TEKCN TC-30 Fiber Cleaver structure diagram\" style=\"max-width:100%; height:auto;\"\u003e\n\n\u003ch3\u003eTypical Use Cases\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFTTH \/ FTTx drop terminations and field splicing\u003c\/li\u003e\n  \u003cli\u003eSinglemode and multimode fiber preparation for fusion splicing\u003c\/li\u003e\n  \u003cli\u003eCentral office and splice lab daily-use cleaving\u003c\/li\u003e\n  \u003cli\u003ePaired with TEKCN TC-400 \/ TC-600 fusion splicers for a complete field workflow\u003c\/li\u003e\n  \u003cli\u003eTechnician training – simple operation ideal for onboarding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Can the TC-30 cleave both singlemode and multimode fiber?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes. The TC-30 supports both singlemode and multimode fiber with a 125 µm cladding diameter and coating diameters from 250 µm to 900 µm.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: How do I rotate the blade to a new position?\u003c\/strong\u003e\u003cbr\u003e\nA: The TC-30 blade has 24 rotation positions. Rotate to a fresh position when cleave quality degrades. No special tools are required — refer to the instruction manual for the rotation procedure.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: How long does the blade last?\u003c\/strong\u003e\u003cbr\u003e\nA: The blade is rated for approximately 48,000 cleaves (2,000 per position × 24 positions). Actual life depends on fiber type, cleanliness, and operating conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is the TC-30 compatible with TEKCN fusion splicers?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes. The TC-30 produces cleave lengths (9–16 mm) compatible with TEKCN TC-400 and TC-600 series fusion splicers, as well as most third-party splicers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Does the TC-30 support drop cable or 3 mm jacket fiber?\u003c\/strong\u003e\u003cbr\u003e\nA: The TC-30 supports bare fiber up to 900 µm coating diameter. For 3 mm drop cable, the jacket must be stripped first to expose the 900 µm or 250 µm coated fiber before cleaving.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote: Cleave angle is measured at room temperature with a new blade. Actual performance may vary with blade condition, fiber type, and operating technique.\u003c\/em\u003e\u003c\/p\u003e","brand":"TEKCN","offers":[{"title":"Default Title","offer_id":42035875283193,"sku":"TEKCN-TC-30","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/products\/Fiber-Optic-Cleaver-Optical-Fiber-Cutting-Tools-TEKCN.jpg?v=1676254287"},{"product_id":"electrodes-for-tekcn-tc-400-fusion-splicer","title":"Electrodes EC-10 For TEKCN TC-400\/TC-600 fusion splicer","description":"\u003ch3 class=\"product-title-text\"\u003e TEKCN EC-10 electrodes For TEKCN TC-400\/TC-600\/\u003ca title=\"Best optical fiber fusion splicer machine - Fiber Fusion Splicer for sale\" href=\"\/en-ph\/collections\/fusion-splicer\" target=\"_blank\"\u003eFiber splicer Splicing Machine\u003c\/a\u003e Electrodes \u003c\/h3\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"electrodes for tekcn fusion splicer\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/ER-10C_ELECTRODE_480x480.jpg?v=1632991561\" width=\"480x480\" height=\"480x480\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"TEKCN EC-10 electrodes\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/ER-10C_ELECTRODE_3_480x480.png?v=1632991579\" width=\"480x480\" height=\"480x480\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"electrodes for tekcn fusion splicer tc-400\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/ER-10C_ELECTRODE-1_480x480.png?v=1632991593\" width=\"480x480\" height=\"480x480\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"electrodes for tekcn fusion splicer tc-600\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/ER-10C_ELECTRODE2_480x480.jpg?v=1632991614\" width=\"480x480\" height=\"480x480\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TEKCN","offers":[{"title":"Default Title","offer_id":42035876167929,"sku":"EC-10-ELECTRODES","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/products\/TEKCN-fusion-splicer-ER-10-CELECTRODE-2.jpg?v=1639535839"},{"product_id":"inno-v7-fiber-cleaver","title":"INNO V7 Fiber Optic Cleaver – Single \u0026 Ribbon, FTTH\/FTTx","description":"\u003ch2\u003eINNO V7 Fiber Optic Cleaver – Single \u0026amp; Ribbon Cleaving for FTTH\/FTTx\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eINNO V7\u003c\/strong\u003e is a versatile, high-precision fiber cleaver capable of handling both \u003cstrong\u003esingle fiber and ribbon fiber up to 12 fibers\u003c\/strong\u003e in a simple 2-step operation. Designed to complement the full INNO VIEW series fusion splicer lineup, the V7 supports the widest range of fiber cable types on the market — from 250 µm bare fiber to 3.0 mm drop cable and flat cable — making it the go-to cleaver for FTTH installers, splice contractors, and data center technicians.\u003c\/p\u003e\n\n\u003cp\u003eIts \u003cstrong\u003eblade push-back reclaim function\u003c\/strong\u003e and optional automatic fiber shard collector keep the workspace clean and safe, while the universal single-fiber holder and replaceable ribbon holder ensure compatibility across job types without swapping tools.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/A_480x480.png?v=1605523026\" alt=\"INNO V7 Fiber Optic Cleaver\" style=\"max-width:100%; height:auto;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/AAAA_480x480.png?v=1605522977\" alt=\"INNO V7 Optical Fiber Cleaver – Splicermarket.com\" style=\"max-width:100%; height:auto;\"\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eSingle \u0026amp; ribbon cleaving\u003c\/strong\u003e – supports 1 fiber up to 12-fiber ribbon in one tool\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003e\u0026lt;0.5° typical cleave angle\u003c\/strong\u003e – high-precision, low-loss cleaves for fusion splicing\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003e2-step operation\u003c\/strong\u003e – fast, simple, and consistent for high-volume workflows\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eUniversal single-fiber holder\u003c\/strong\u003e – supports 250 µm, 900 µm, 3.0 mm, and flat cable\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eReplaceable ribbon holder\u003c\/strong\u003e – accommodates 2–12 fiber ribbon cable\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003e~48,000 cleave blade life\u003c\/strong\u003e – 1,000 cleaves × 16 positions × 3 heights\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eBlade push-back reclaim function\u003c\/strong\u003e – safe blade retraction after each cleave\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eOptional automatic fiber shard collector\u003c\/strong\u003e – keeps workspace clean and safe\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eCompatible with all INNO VIEW series fusion splicers\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse; width:100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eSingle \u0026amp; ribbon fiber cleaver\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCladding Diameter\u003c\/td\u003e\n\u003ctd\u003e125 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTypical Cleave Angle\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.5°\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCleave Length – Single Fiber\u003c\/td\u003e\n\u003ctd\u003e8–20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCleave Length – Ribbon Fiber\u003c\/td\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplicable Single Fiber\u003c\/td\u003e\n\u003ctd\u003e250 µm, 900 µm, 3.0 mm cable, flat cable (universal holder)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplicable Ribbon Fiber\u003c\/td\u003e\n\u003ctd\u003e2–12 fiber ribbon cable (replaceable holder)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperation Steps\u003c\/td\u003e\n\u003ctd\u003e2 steps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBlade Life\u003c\/td\u003e\n\u003ctd\u003e~48,000 cleaves (1,000 × 16 positions × 3 heights)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eReclaim Function\u003c\/td\u003e\n\u003ctd\u003eBlade push-back\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHolder – Single Fiber\u003c\/td\u003e\n\u003ctd\u003eUniversal holder (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHolder – Ribbon Fiber\u003c\/td\u003e\n\u003ctd\u003eReplaceable holder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFiber Shard Collector\u003c\/td\u003e\n\u003ctd\u003eOptional (automatic)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSplicer Compatibility\u003c\/td\u003e\n\u003ctd\u003eAll INNO VIEW series fusion splicers\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTypical Use Cases\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFTTH \/ FTTx drop terminations and field splicing (single fiber)\u003c\/li\u003e\n  \u003cli\u003eRibbon fiber splice preparation for data centers and trunk cable work\u003c\/li\u003e\n  \u003cli\u003eCentral office and splice lab multi-fiber workflows\u003c\/li\u003e\n  \u003cli\u003ePaired with INNO VIEW series fusion splicers for a complete end-to-end splicing solution\u003c\/li\u003e\n  \u003cli\u003eContractors handling mixed single\/ribbon fiber jobs with one tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Can the V7 cleave both single fiber and ribbon fiber?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes. The V7 supports single fiber (250 µm, 900 µm, 3.0 mm, flat cable) with the universal holder, and ribbon fiber from 2 to 12 fibers with the replaceable ribbon holder.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: What is the blade life of the V7?\u003c\/strong\u003e\u003cbr\u003e\nA: The blade is rated for approximately 48,000 cleaves, calculated as 1,000 cleaves per step × 16 blade positions × 3 height settings. Actual life depends on fiber type and operating conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is the V7 compatible with non-INNO fusion splicers?\u003c\/strong\u003e\u003cbr\u003e\nA: The V7 is optimized for INNO VIEW series splicers. It can also be used with most third-party fusion splicers that accept standard cleave lengths (8–20 mm single \/ 10 mm ribbon).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is the fiber shard collector included?\u003c\/strong\u003e\u003cbr\u003e\nA: The automatic fiber shard collector is optional and may not be included in the standard package. Please check the listing or contact us to confirm what is included with your order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: What is the V7’s cleave angle specification?\u003c\/strong\u003e\u003cbr\u003e\nA: The V7 achieves a typical cleave angle of less than 0.5°, meeting the requirements for low-loss fusion splicing on both singlemode and multimode fiber.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: What warranty does the V7 come with?\u003c\/strong\u003e\u003cbr\u003e\nA: The INNO V7 comes with a 1-month warranty. Please contact us for after-sales support or extended warranty options.\u003c\/p\u003e","brand":"INNO","offers":[{"title":"Default Title","offer_id":42035894419705,"sku":"INNO-V709304","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/products\/INNO-V7-Fiber-optic-Cleaver.png?v=1639581385"},{"product_id":"sumitomo-er-10-electrodes-for-type-39-type-66-type-81c-type-600c","title":"Sumitomo ER-10 Fusion Splicer Replacement Electrodes | TYPE-39\/66\/81C\/82C\/82C+\/600C Compatible","description":"\u003ch2\u003eSumitomo ER-10 Fusion Splicer Replacement Electrodes – TYPE-39 \/ TYPE-66 \/ TYPE-81C \/ TYPE-82C \/ TYPE-82C+ \/ TYPE-600C\u003c\/h2\u003e\n\u003cp\u003eElectrodes are the most critical consumable in any fusion splicer — and worn electrodes are the leading cause of high splice loss, arc instability, and calibration failures in the field. The \u003cstrong\u003eSumitomo ER-10\u003c\/strong\u003e is the OEM-compatible replacement electrode set for Sumitomo Electric fusion splicers, covering six popular models: \u003cstrong\u003eTYPE-39, TYPE-66, TYPE-81C, TYPE-82C, TYPE-82C+, and TYPE-600C\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eReplacing your ER-10 electrodes at the recommended interval restores arc symmetry and stability, brings splice loss back to factory-spec levels, and protects your splicer’s arc chamber from damage caused by degraded electrode tips. Fresh electrodes are the single most cost-effective maintenance action you can take to keep your Sumitomo splicer performing at its best.\u003c\/p\u003e\n\u003ch2\u003eCompatible Sumitomo Fusion Splicer Models\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSumitomo TYPE-39\u003c\/li\u003e\n\u003cli\u003eSumitomo TYPE-66\u003c\/li\u003e\n\u003cli\u003eSumitomo TYPE-81C\u003c\/li\u003e\n\u003cli\u003eSumitomo TYPE-82C\u003c\/li\u003e\n\u003cli\u003eSumitomo TYPE-82C+\u003c\/li\u003e\n\u003cli\u003eSumitomo TYPE-600C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Compatible Design:\u003c\/strong\u003e Engineered to Sumitomo Electric specifications for consistent arc performance, splice quality, and splicer compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores Arc Stability:\u003c\/strong\u003e Fresh ER-10 electrodes eliminate arc asymmetry, high splice loss, and frequent calibration errors caused by electrode wear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects Splicer Components:\u003c\/strong\u003e Regular replacement prevents arc chamber damage and extends the overall service life of your Sumitomo splicer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Model Coverage:\u003c\/strong\u003e One part number covers 6 Sumitomo splicer models — ideal for teams and service centers managing multiple units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Field Replacement:\u003c\/strong\u003e Standard electrode format for quick swap with minimal downtime during installation or maintenance operations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumable Item:\u003c\/strong\u003e No warranty — standard for all fusion splicer electrodes across all brands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhen to Replace Your Sumitomo ER-10 Electrodes\u003c\/h2\u003e\n\u003cp\u003eSumitomo Electric recommends replacing ER-10 electrodes every \u003cstrong\u003e3,000–5,000 arc discharges\u003c\/strong\u003e under normal operating conditions. Most Sumitomo splicers display the current arc count in the maintenance or diagnostic menu. Replace your electrodes sooner if you observe any of the following warning signs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreasing average splice loss despite correct fiber preparation and cleave quality\u003c\/li\u003e\n\u003cli\u003eFrequent arc calibration failures or arc check errors\u003c\/li\u003e\n\u003cli\u003eVisible electrode tip erosion, pitting, or asymmetric wear when inspected\u003c\/li\u003e\n\u003cli\u003eSplicer error messages related to arc power, arc position, or electrode condition\u003c\/li\u003e\n\u003cli\u003eInconsistent splice results on fiber types that previously spliced reliably\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Replace Sumitomo ER-10 Electrodes\u003c\/h2\u003e\n\u003cp\u003eElectrode replacement on Sumitomo TYPE-series splicers is a straightforward field procedure. Open the wind protector and V-groove cover, then carefully remove the worn electrodes using the electrode removal tool included with your splicer. Insert the new ER-10 electrodes and ensure they are fully and evenly seated. Close the covers and run the splicer’s built-in arc calibration (arc check) routine before resuming splicing. Always handle electrodes by the body — never touch the tungsten tips with bare hands, as skin oils can contaminate the arc surface.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eER-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSumitomo Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Models\u003c\/td\u003e\n\u003ctd\u003eTYPE-39, TYPE-66, TYPE-81C, TYPE-82C, TYPE-82C+, TYPE-600C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrode Type\u003c\/td\u003e\n\u003ctd\u003eTungsten fusion splicer electrodes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Replacement Interval\u003c\/td\u003e\n\u003ctd\u003eEvery 3,000–5,000 arc discharges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eConsumable — no warranty (industry standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSumitomo ER-10 Replacement Electrode Set × 1 pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are ER-10 electrodes compatible with all Sumitomo TYPE-82C variants?\u003c\/strong\u003e\u003cbr\u003eA: Yes. The ER-10 is compatible with both the TYPE-82C and TYPE-82C+ (Plus) variants, as well as the TYPE-39, TYPE-66, TYPE-81C, and TYPE-600C models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I replace the electrodes on my Sumitomo TYPE-82C or TYPE-600C?\u003c\/strong\u003e\u003cbr\u003eA: Sumitomo recommends replacing ER-10 electrodes every 3,000–5,000 arc discharges. Check the arc count in your splicer’s maintenance menu. If you notice increasing splice loss, arc instability, or calibration failures before reaching this interval, replace the electrodes immediately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why do worn electrodes cause high splice loss?\u003c\/strong\u003e\u003cbr\u003eA: Fusion splicer electrodes erode gradually with each arc discharge due to the extreme temperatures involved (over 2,000°C). As the tungsten tips erode, the arc becomes asymmetric and unstable, resulting in poor fiber alignment during fusion, higher splice loss, and inconsistent results. Fresh ER-10 electrodes restore the symmetric, stable arc required for low-loss splices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to run arc calibration after installing new ER-10 electrodes?\u003c\/strong\u003e\u003cbr\u003eA: Yes. After installing new ER-10 electrodes, always run the splicer’s arc calibration (arc check) routine before resuming splicing. This allows the splicer to characterize the new electrodes and optimize arc power for your current altitude and environmental conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why are fusion splicer electrodes sold without a warranty?\u003c\/strong\u003e\u003cbr\u003eA: Fusion splicer electrodes are consumable items that wear out through normal use — similar to printer ink cartridges or cutting blades. No warranty coverage for consumables is the industry standard across all brands including Sumitomo, Fujikura, INNO, and Furukawa. For bulk pricing or technical questions, contact us at sales@splicermarket.com.\u003c\/p\u003e","brand":"SUMITOMO","offers":[{"title":"Default Title","offer_id":42035917619449,"sku":"ER-10-ELECTRODE","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/products\/Splicermarket-Spare-electrodes-Sumitomo-ER-10-Electrodes.jpg?v=1639626067"},{"product_id":"electrodes-elct2-20a-afl-spare-electrodes-for-fsm-18-fsm-60-70s-80s-70r-19s-19r","title":"AFL ELCT2-20A Fusion Splicer Replacement Electrodes | FSM-18\/60\/70S\/80S\/70R\/19S\/19R Compatible","description":"\u003ch2\u003eAFL ELCT2-20A Fusion Splicer Replacement Electrodes – FSM-18 \/ FSM-60 \/ FSM-70S \/ FSM-80S \/ FSM-70R \/ FSM-19S \/ FSM-19R\u003c\/h2\u003e\n\u003cp\u003eElectrodes are the most frequently replaced consumable in any fusion splicer — and using the right electrodes is critical to splice quality, arc stability, and splicer longevity. The \u003cstrong\u003eAFL ELCT2-20A\u003c\/strong\u003e is the OEM-compatible replacement electrode set for AFL FuseConnect and Fujikura-platform fusion splicers including the \u003cstrong\u003eFSM-18, FSM-60, FSM-70S, FSM-80S, FSM-70R, FSM-19S, and FSM-19R\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWhen your splicer starts showing high splice loss, arc instability, or frequent arc calibration failures, worn electrodes are almost always the cause. Replacing with fresh ELCT2-20A electrodes restores arc performance, reduces splice loss, and extends the life of your splicer — typically recommended every 3,000–5,000 arc discharges depending on operating conditions.\u003c\/p\u003e\n\u003ch2\u003eCompatible Fusion Splicer Models\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAFL \/ Fujikura FSM-18S\u003c\/li\u003e\n\u003cli\u003eAFL \/ Fujikura FSM-60S\u003c\/li\u003e\n\u003cli\u003eAFL \/ Fujikura FSM-70S\u003c\/li\u003e\n\u003cli\u003eAFL \/ Fujikura FSM-80S\u003c\/li\u003e\n\u003cli\u003eAFL \/ Fujikura FSM-70R\u003c\/li\u003e\n\u003cli\u003eAFL \/ Fujikura FSM-19S\u003c\/li\u003e\n\u003cli\u003eAFL \/ Fujikura FSM-19R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Compatible Design:\u003c\/strong\u003e Engineered to the same specifications as original AFL electrodes for consistent arc performance and splice quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores Arc Stability:\u003c\/strong\u003e Fresh electrodes eliminate arc instability, high splice loss, and frequent calibration errors caused by electrode wear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtends Splicer Life:\u003c\/strong\u003e Regular electrode replacement protects the splicer’s arc chamber and internal components from damage caused by degraded electrodes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Field Replacement:\u003c\/strong\u003e Standard electrode format for quick swap without tools — minimal downtime during field operations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Model Compatibility:\u003c\/strong\u003e One part number covers 7 AFL\/Fujikura splicer models — ideal for teams running mixed fleets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhen to Replace Your Fusion Splicer Electrodes\u003c\/h2\u003e\n\u003cp\u003eAFL recommends replacing electrodes every \u003cstrong\u003e3,000–5,000 arc discharges\u003c\/strong\u003e under normal operating conditions. Replace sooner if you observe any of the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreasing average splice loss despite proper fiber preparation\u003c\/li\u003e\n\u003cli\u003eFrequent arc calibration failures or unstable arc discharge\u003c\/li\u003e\n\u003cli\u003eVisible electrode tip erosion, pitting, or asymmetric wear\u003c\/li\u003e\n\u003cli\u003eSplicer error messages related to arc power or electrode condition\u003c\/li\u003e\n\u003cli\u003eInconsistent splice results on fibers that previously spliced well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Replace ELCT2-20A Electrodes\u003c\/h2\u003e\n\u003cp\u003eElectrode replacement on AFL FSM-series splicers is a straightforward field procedure. Open the wind protector, remove the V-groove cover, and carefully extract the worn electrodes using the electrode removal tool. Insert the new ELCT2-20A electrodes, ensure they are fully seated, and run the splicer’s built-in arc calibration routine before resuming splicing. Always handle electrodes by the body — never touch the tips.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eELCT2-20A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Brand\u003c\/td\u003e\n\u003ctd\u003eAFL \/ Fujikura\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Models\u003c\/td\u003e\n\u003ctd\u003eFSM-18, FSM-60, FSM-70S, FSM-80S, FSM-70R, FSM-19S, FSM-19R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrode Type\u003c\/td\u003e\n\u003ctd\u003eTungsten fusion splicer electrodes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Replacement Interval\u003c\/td\u003e\n\u003ctd\u003eEvery 3,000–5,000 arc discharges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eConsumable — no warranty (standard for all fusion splicer electrodes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eELCT2-20A Replacement Electrode Set × 1 pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are ELCT2-20A electrodes compatible with Fujikura splicers as well as AFL splicers?\u003c\/strong\u003e\u003cbr\u003eA: Yes. AFL fusion splicers are built on the Fujikura platform. The ELCT2-20A electrodes are compatible with both AFL-branded and Fujikura-branded versions of the FSM-18, FSM-60, FSM-70S, FSM-80S, FSM-70R, FSM-19S, and FSM-19R splicers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How often should I replace the electrodes on my FSM-60 or FSM-70S?\u003c\/strong\u003e\u003cbr\u003eA: AFL recommends replacing electrodes every 3,000–5,000 arc discharges. Most splicers display an arc count in the maintenance menu. If you notice increasing splice loss, arc instability, or calibration failures before reaching this interval, replace the electrodes immediately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why do electrodes wear out and affect splice quality?\u003c\/strong\u003e\u003cbr\u003eA: Fusion splicer electrodes erode gradually with each arc discharge due to the extreme temperatures involved (over 2,000°C). As the tungsten tips erode, the arc becomes asymmetric and unstable, leading to higher splice loss, poor fusion, and inconsistent results. Fresh electrodes restore the symmetric, stable arc needed for low-loss splices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Do I need to run arc calibration after replacing electrodes?\u003c\/strong\u003e\u003cbr\u003eA: Yes. After installing new ELCT2-20A electrodes, always run the splicer’s arc calibration (arc check) routine before resuming splicing. This allows the splicer to characterize the new electrodes and optimize arc power for your current environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Are these electrodes covered by a warranty?\u003c\/strong\u003e\u003cbr\u003eA: Fusion splicer electrodes are consumable items and are not covered by a product warranty — this is standard across all brands and suppliers.\u003c\/p\u003e\n\u003cp\u003eFor questions or bulk pricing, contact us at sales@splicermarket.com.\u003c\/p\u003e","brand":"AFL","offers":[{"title":"Default Title","offer_id":42035918340345,"sku":"electrode-201-afl","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/products\/Electrodes-ELCT2-20A-AFL-fujikura-Spare-Electrodes.jpg?v=1639053903"},{"product_id":"sumitomo-fc-6s-cleaver-high-precision-fiber-optic-cleaver","title":"Sumitomo FC-6S High Precision Fiber Optic Cleaver","description":"\u003ch2\u003eSumitomo FC-6S High Precision Fiber Optic Cleaver\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSumitomo FC-6S\u003c\/strong\u003e is a traditional benchtop fiber cleaver engineered for technicians who prioritize cleave consistency and long blade life in a simple, reliable form factor. With a typical cleave angle of \u003cstrong\u003e0.5°\u003c\/strong\u003e and a blade rated for up to \u003cstrong\u003e54,000 cleaves\u003c\/strong\u003e across 24 rotation positions, the FC-6S is a workhorse tool for splice preparation in central offices, MDF\/IDF cabinets, and controlled field environments.\u003c\/p\u003e\n\n\u003cp\u003eIts pre-fitted single fiber adapter and optional off-cut collector make it easy to set up and keep your workspace clean. The field-replaceable blade means minimal downtime — swap it on-site without sending the tool in for service.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/FC-6S_2_480x480.png?v=1601259617\" alt=\"Sumitomo FC-6S High Precision Fiber Optic Cleaver\" style=\"max-width:100%; height:auto;\"\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e✅ \u003cstrong\u003e0.5° typical cleave angle\u003c\/strong\u003e – consistent, low-angle cleaves for low-loss fusion splices\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003e54,000-cleave blade life\u003c\/strong\u003e – 2,250 cleaves × 24 rotation positions\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eField-replaceable blade\u003c\/strong\u003e – swap on-site, no service required\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003ePre-fitted single fiber adapter\u003c\/strong\u003e – ready to use out of the box\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eOptional off-cut collector\u003c\/strong\u003e – safely captures fiber scrap\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eSimple benchtop design\u003c\/strong\u003e – easy to learn, reliable in daily use\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eCompact \u0026amp; lightweight\u003c\/strong\u003e – 63 × 77 × 63 mm, 380 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse; width:100%;\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eFC-6S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFiber Material\u003c\/td\u003e\n\u003ctd\u003eSilica glass\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCladding Diameter\u003c\/td\u003e\n\u003ctd\u003e125 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFiber Count\u003c\/td\u003e\n\u003ctd\u003eSingle fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCleave Length\u003c\/td\u003e\n\u003ctd\u003e5–20 mm \/ 10–20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCleave Angle\u003c\/td\u003e\n\u003ctd\u003eTypical 0.5° (single fiber)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBlade Life\u003c\/td\u003e\n\u003ctd\u003e54,000 cleaves (2,250 × 24 positions)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eField Replaceable Blade\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSingle Fiber Adapter\u003c\/td\u003e\n\u003ctd\u003ePre-fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOff-Cut Collector\u003c\/td\u003e\n\u003ctd\u003eOptional\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (W×D×H)\u003c\/td\u003e\n\u003ctd\u003e63 × 77 × 63 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e380 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTypical Use Cases\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCentral office and splice lab fiber preparation\u003c\/li\u003e\n  \u003cli\u003eMDF \/ IDF cabinet splicing and terminations\u003c\/li\u003e\n  \u003cli\u003eFTTH \/ FTTx single-fiber splice preparation\u003c\/li\u003e\n  \u003cli\u003ePaired with Sumitomo fusion splicers (T-400S, Z-2C, Type-82 series) for a complete splicing workflow\u003c\/li\u003e\n  \u003cli\u003eTraining environments – simple operation ideal for technician onboarding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/files\/High-Precision-Sumitomo-FC-6S-Cleaver_480x480.jpg?v=1651744532\" alt=\"Sumitomo FC-6S High Precision Single Fiber Cleaver\" style=\"max-width:100%; height:auto;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/files\/Sumitomo-FC-6S-Cleaver-High-Precision_480x480.jpg?v=1651744581\" alt=\"SUMITOMO FC-6S Fiber Cleaver\" style=\"max-width:100%; height:auto;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/files\/Sumitomo-FC-6S-Fiber-Cleaver_480x480.jpg?v=1651744617\" alt=\"Sumitomo FC-6S Precision Optical Fiber Cleaver\" style=\"max-width:100%; height:auto;\"\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: What is the difference between the FC-6S and FC-6RS?\u003c\/strong\u003e\u003cbr\u003e\nA: The FC-6S is the standard single-fiber benchtop cleaver. The FC-6RS is a ribbon-capable variant. If you need to cleave ribbon fiber, please contact us to confirm the correct model for your application.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is the off-cut collector included?\u003c\/strong\u003e\u003cbr\u003e\nA: The off-cut collector is optional and may not be included in the standard package. Please check the product listing or contact us to confirm what is included with your order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: How do I rotate the blade to a new position?\u003c\/strong\u003e\u003cbr\u003e\nA: The FC-6S blade has 24 rotation positions. Refer to the instruction manual for the blade rotation procedure. No special tools are required for standard blade rotation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Is the FC-6S compatible with Sumitomo fusion splicers?\u003c\/strong\u003e\u003cbr\u003e\nA: Yes. The FC-6S produces cleave lengths (5–20 mm) compatible with Sumitomo's T-400S, Z-2C, and Type-82 series splicers, as well as most third-party fusion splicers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eQ: Can the FC-6S cleave drop cable or 3 mm jacket fiber?\u003c\/strong\u003e\u003cbr\u003e\nA: The FC-6S is designed for bare fiber (125 µm cladding). For drop cable or jacketed fiber cleaving, a fiber stripper must be used first to expose the bare fiber before cleaving.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNote: Cleave angle is measured at room temperature with a new blade. Actual performance may vary with blade condition, fiber type, and operating technique.\u003c\/em\u003e\u003c\/p\u003e","brand":"SUMITOMO","offers":[{"title":"Default Title","offer_id":42035920011513,"sku":"FC6S083742","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/products\/Sumitomo-FC-6S-Cleaver-High-Precision-Fiber-Optic-Cleaver-2.jpg?v=1639626834"},{"product_id":"otdr-fc-adapter-fc-connector-eui-89-for-exfo-max-715b-max-720b-max-730-max-720-ftb-1-ftb-2-otdr-的副本","title":"OTDR FC Adapter fc connector EUI-89 for EXFO MAX-715B MAX-720B MAX-730 MAX-720 FTB-1,FTB-2 OTDR","description":"\u003ch2 style=\"text-align: center;\"\u003e\n\u003ca href=\"\/en-ph\/collections\/hand-held-otdr\" title=\"Best Price Fiber Optic OTDR Machine -Mini Otdr\"\u003eOTDR\u003c\/a\u003e FC Adapter FC connector for EXFO MAX-715B MAX-720B MAX-730 MAX-720 FTB-1,FTB-2 OTDR\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/FC_480x480.jpg?v=1594210338\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/FC2_480x480.jpg?v=1594210360\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/FC3_480x480.jpg?v=1594210375\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/FC4_480x480.jpg?v=1594210394\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/FC5_480x480.jpg?v=1594210408\"\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left; padding-left: 30px;\"\u003e\n\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i2.476aadd3sBqbuK\"\u003ePackaging Details:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eStandard package (with one pcs in one box).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDelivery Detail:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShipped in 1  working day after payment\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e","brand":"EXFO","offers":[{"title":"Default Title","offer_id":42035963035897,"sku":"EUI-89","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/products\/EXFO-OTDR-FC-Adapter-fc-connector-EUI-89-3.jpg?v=1639624245"},{"product_id":"otdr-sc-adapter-sc-connector-eui-91-for-exfo-max-715b-max-720b-max-730-max-720-ftb-1-ftb-2-otdr","title":"OTDR SC Adapter sc connector EUI-91 for EXFO MAX-715B MAX-720B MAX-730 MAX-720 FTB-1,FTB-2 OTDR","description":"\u003ch3 style=\"text-align: left;\"\u003eOTDR SC Adapter sc connector for EXFO MAX-715B MAX-720B MAX-730 MAX-720 FTB-1,FTB-2 OTDR\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/www.opticfibertool.com\/collections\/accessories\/products\/otdr-sc-adapter-sc-connector-eui-91-for-exfo-max-715b-max-720b-max-730-max-720-ftb-1-ftb-2-otdr\" title=\"OTDR SC Adapter sc connector - opticfibertool.com\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/SC1_66e05a4d-2210-45d7-80f9-aef0383c7bfc_480x480.jpg?v=1594208911\"\u003e\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/SC_1147aeb1-68a8-4d37-a62e-11291ba72348_480x480.jpg?v=1594208892\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/SC2_480x480.jpg?v=1594208931\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/SC3_480x480.jpg?v=1594208953\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/SC4_480x480.jpg?v=1594208978\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0058\/7923\/4648\/files\/SC5_480x480.jpg?v=1594208855\"\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left; padding-left: 60px;\"\u003e\n\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i2.476aadd3sBqbuK\"\u003ePackaging Details:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eStandard package (with one pcs in one box).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDelivery Detail:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eShipped in 1  working day after payment\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e","brand":"EXFO","offers":[{"title":"Default Title","offer_id":42035963101433,"sku":"EUI-91","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/4304\/0761\/products\/EXFO-OTDR-SC-Adapter-SC-connector-EUI-89.jpg?v=1639624813"}],"url":"https:\/\/www.splicermarket.com\/en-ph\/collections\/optical-and-equipment-accessories.oembed","provider":"Splicer Market","version":"1.0","type":"link"}