The Introduction About Fujikura CT08 Fiber Cleaver

The Introduction About Fujikura CT08 Fiber Cleaver

Best Fujikura CT08 For Sale -

The CT08 cleaver is an extremely rugged, durable, and easy to use single fiber cleaver. Ideal for FTTH applications, the CT08 provides unmatched levels of impact resistance and also eliminates the requirement for tools during blade rotation. A thumbwheel on the bottom of the cleaver is applied for blade rotation, and the blade position indicator has been changed to enable quick and easy viewing. The top clamp opens to a position past vertical allowing for easy viewing, cleaning, and adjustment of the cleave length. The blade is retracted automatically when opening the top clamp and is activated upon closing, making this a true one-step cleaver. The cleaver blade and fiber clamping mechanism is extremely easy to replace in the field. A manual scrap collector is included.

How to adjust the blade height adjustment

Fiber Holder or Fiber Plate is necessary for this step.


CT08 - Fujikura Fiber Cleaver



User Friendly

  1. Easy Maintenance
    The CT08 fiber cleaver has a user-replaceable blade and rubber clamps, so there's no need to send the device to a service center for blade or clamp replacement.


Fujikura Cleaver CT08 For Sale


  1. Easy Access & Longer Stripped Fibers
    The CT08 lid opens 100 degrees. Therefore, it is easier to see to place the fiber or fiber holder correctly, and to clean the rubber clamps and cleaver blade for maintenance.


Fujikura Fiber Cleaver CT08


  1. Single Action Operation
    The CT08 cleaves with a single press action.


Fujikura CT08 Fiber Cleaver Price


  1. Easier Blade Position change
    The CT08 blade position is changed by rotating the bottom dial. It is not necessary to use tools to change the blade position.


Optical Fiber Cleaver CT08  -

Standard Package

Fujikura CT08 Fiber Cleaver Price

Optional Items

Fujikura Cleaver CT08 For Sale USA -




Applicable Fiber

Silica optical fiber

Number of fibers


Coating Diameter

160 to 900μm (2/3mm cord & drop cable)

Cladding Diameter


Cleave Length

5-20mm with AD-50

10mm with FH-xx-

Cleave Angle

Typical 0.5 degrees

Blade life

Typical 48,000 fibers 


110(W) x 95(D) x 45(H)mm



Operation condition

Temperature: -10 to 50℃ Humidity: 0 to 95% RH(Non-condensing)

Storage condition

Temperature: - 40 to 80℃ Humidity:0 to 95% RH(Non-condensing)

Resistance features


Shock: 76cm (30inch) all directions dropShock: 76cm (30inch) all directions drop

  Dust resistance: Exposure to dust (0.1 to 500μm dia.    Alumina Silicate)

  Rain resistance: H=10mm/hr for 10min

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.